.

Tuesday, April 2, 2013

Social Work

Summarise the diagnostic steps to take and things to look protrude for when troubleshooting:

1. Hard become
The first thing to direct when troubleshooting a hard drive is if the BIOS setup records the hard drive or not, the way to check this is by going to BIOS setup and get word if it shows the capacity of the drive and if it shows zeros then it does not register the drive, if it does not register it and you have multiple drives check if you have selected which drive is the master and which is the slave, make sure that the master drive is the hotshot that has the operating system, there is a jumper on the second of the drive that you use to select these options, if BIOS still does not register the drive check if the transmission lines argon lay if not seat the SATA/IDE cables and if you doubt them replace them, then check if the drive seeks and spins up if it does not seek or spin up guess swapping the drive and cause the one that you replacing in a testing PC before you trash it, but do not trash a drive that has valuable entropy because it can be recovered, but if the drive seeks and spins up and you are still using the IDE cables you should match pin 1 on all connectors, and if that does not work then you should replace the IDE cable or the hard drive may be risky or incompatible with the system.
2.

Ordercustompaper.com is a professional essay writing service at which you can buy essays on any topics and disciplines! All custom essays are written by professional writers!

central processor, RAM and Motherboard
The first you should consider when troubleshooting these components motherboard, CPU, and RAM, is the examine if it is live or not, if it is not check if the RAM is seated and matched hence or not, if it is not seated or matched accordingly you will hear a long honk when you try to turn on the computer, bear in mind that beeps transmute according to BIOS manufacturer so a long beep is usually for memory failure, if it is the memory reseat it and reboot the system, check if the CPU is seated flat or not, when you seat the CPU make sure you do not force it because the pins ability bend and you will have to buy a impertinent one, and make sure that the heat sink is seated on the...If you want to get a full essay, order it on our website: Ordercustompaper.com



If you want to get a full essay, wisit our page: write my paper

No comments:

Post a Comment